Model #79X-5-M Pneumatic Miter Door Pro

Features include:
*5 Section rotating machine
*26” X 62” Maximum Capacity
*5” X 13” Minimum Capacity * 2 Horizontal and 2 vertical clamps (applies pressure to the mitered corners)
*Dial regulators, one pre clamp (allows for precise adjustments of mitered corners)
*Flow controls on regulator assemblies
*500 lbs of clamping force per cylinder
*Machine rotates counter clockwise for safety
*Electric gear motor runs on standard 110V
*Push button rotation

Selling features:
*No more pinning of doors
*Virtually eliminate out of square doors = No rejects
*High production or custom runs
*Very user friendly
*Quick release latches on the jaws and the moveable squaring bar (the white one) is on roller bearings
*The squaring mechanism (shim bar on the left side of the machine) can be re-calibrated if necessary
*All welded steel construction
*Lifetime warranty on welds
*Made in the USA

With a 26” X 62” capacity, you can clamp and square over 95% of your cabinet doors. This high production machine will allow you to clamp and square your miter and stile and rail doors face up which will allow the customer to check the joint and wipe away any squeeze out. By eliminating the pinning process you will save time and money (no more ruined sanding belts)
This machine will arrive at the customers site on a skid with two sections already attached and plumed up. The other three sections, which will be stacked under the machine, need to be put on by the customer. Total install time is just a couple of hours.

Final set up dimensions:
*108”L X 110H” X 88”W

Shipping dimensions:
* 110”L X 77”H X 65”W

Shipping weight: 2400 lbs.