Model #79X-5-DM Dual Miter Door Pro

Features include:
*5 Section rotating machine
*26” X 42” Maximum, 4” X 12” minimum capacity left side
*26” X 42” Maximum, 4” X 10” minimum capacity right side
*2 Horizontal and 2 vertical clamps (applies pressure to the mitered corners)
*Dial regulators, one pre clamp (allows for precise adjustments of mitered corners)
*Flow controls on regulator assemblies
*Machine rotates counter clockwise for safety
*Electric gear motor runs on standard 110V
*Push button rotation

Selling features:
*No more pinning of doors
*Virtually eliminate out of square doors = No rejects
*High production or custom runs



*Very user friendly
*Quick release latches on the jaws and the moveable squaring bar (the white one) is on roller bearings
*The squaring mechanism (shim bar on the left side and right side of the machine) can be re-calibrated if necessary
*All welded steel construction
*Lifetime warranty on welds
*Made in the USA

This high production machine will allow you to clamp and square your miter and stile and rail doors face up which will allow the customer to check the joint and wipe away any squeeze out. By eliminating the pinning process you will save time and money (no more ruined sanding belts)
This machine will arrive at the customers site on (2) skids. One skid will contain the frame of the machine with one section hung with all of the air hoses attached. The other (4) sections, will be stacked on their own separate skid. The use of a fork lift will come in very handy when putting the machine together.

Final set up dimensions:
*156”L X 110H” X 88”W

Shipping dimensions:
*156”L X 77”H X 65”W

Shipping weight (two skids):
*2000 lbs. and 1600 lbs.